La Salud estructural en edificaciones utilizando tecnología BIM: Revisión literaria
Contenido principal del artículo
In the science of monitoring and health maintenance have facilitated damage and defects in buildings by expanding technology through the use of wireless sensors, 3D model, among others, visualize and document results that have encouraged researchers to use powerful tools such as BIM technology, aiming to gain importance due to driving tools that are widely used in the architecture, engineering and construction sector, due to the combination of the results of structural health monitoring (SHM). Eighty articles indexed in Scopus, Ebsco, Scielo and Science Direct databases were reviewed, from the years 2016 - 2021, the following keywords were used to search for information: structural health and BIM technology, Structural Health in building and Bim, Properties of recycled concrete, Health and buildings, Building and BIM technology, Structural health in buildings, structural health of buildings through BIM. Subject area filters were used such as: Engineering, Engineering and Building. Concluding that the union of BIM and SHM technology is the support to establish the situation of the structure, specifying the range of the structural damage and estimating the duration of the structure.
X. Chen, A. Y. Chang Richards , A. Pelosi , Y. Jia , X. Shen , M. K. Siddiqui and N. Yang , "Implementation of technologies in the construction industry: a systematic review," Engineering, Construction and Architectural Management, 2021.
A. Hande , D. Gökhan and . I. Zeynep, "Building Information Modeling (BIM) Use in Turkish Construction Industry," Procedia Engineering, vol. 161, pp. 174 - 179, 2016.
X. Ren, "Full-scale building structural health monitoring by shake table tests and extreme learning machine.," Geotechnical and Geological Engineering, vol. 38, pp. 1939-1947, 2020.
Y. Nakamura and K. Okada, "Effects and dynamic characteristics of the core‐suspended isolation system assessed by long‐term structural health monitoring.," Earthquake Engineering and Structural Dynamics, vol. 50, pp. 2259-2276, 2021.
K. Yan, Y. Zhang, Y. Yan, C. Xu and S. Zhang, "Fault diagnosis method of sensors in building structural health monitoring system based on communication load optimization.," Computer Communications, vol. 159, pp. 310-316, 2020.
V. Tatjana , K. Diana , R. H. M, P. Eugenio and K. Z. Edmundas , "Building information modeling (BIM) for structural engineering: A bibliometric analysis of the literature," Advances in Civil Engineering, vol. 2019, pp. 1-19, 2019.
M. Zhou, P. Zhao, H. Ren, F. Shi, H. Feng and L. Qin, "Research Progress of Structural Health Monitoring Based on BIM Technology," IOP Conference Series: Earth and Environmental Science, vol. 651, no. 3, 2021.
A. Kelm, A. Meins-Becker and M. Helmus , "Improving occupational health and safety by using advanced technologies and BIM," ISEC 2019 - 10th International Structural Engineering and Construction Conference, 2019.
F. Fedorik , R. Heikkilä , T. Makkonen and A. Haapala, "Integration of structural health control in BIM for Current and future residential buildings," ISARC 2017 - Proceedings of the 34th International Symposium on Automation and Robotics in Construction, pp. 134 - 139, 2017.
C. Bodtländer , M. Helmus , A. Kelm and A. Meins-Becker , "Bim-processes-health & safety," ISEC 2017 - 9th International Structural Engineering and Construction Conference: Resilient Structures and Sustainable Construction, 2017.
Y. Cao, S. Miraba, S. Rafiei, A. Ghabussi, F. Bokaei, S. Baharom, P. Haramipour and H. Assilzadeh, "Economic application of structural health monitoring and internet of things in efficiency of building information modeling," Smart Structures and System, vol. 26, no. 5, pp. 559 - 573, 2020.
R. S. Panah and M. Kioumarsi, "Application of Building Information Modelling (BIM) in the Health Monitoring and Maintenance Process:A Systematic Review," sensors, vol. 21, pp. 1 - 26, 2021.
G. Hou, L. Li, Z. Xu, Q. Chen, Y. Liu and B. Qiu, "A BIM-based visual warning management system for structural health monitoring integrated with LSTM network," KSCE Journal of Civil Engineering, vol. 25, no. 8, pp. 2779 - 2793, 2021.
J. Xu and F. Moreu , "A Review of augmented reality applications in civil infrastructure during the 4th industrial revolution," Frontiers in Built Environment, vol. 7, 2021.
J. Liu , D. Xu , J. Hyyppa and Y. Liang , "A survey of applications with combined BIM and 3D laser scanning in the Life cycle of buildings," IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, vol. 17, pp. 5627 - 5637, 2021.
M. Marzouk , M. Metawie , M. ElSharkawy , A. Eid and S. Hawas , "Application of laser scanning technology in energy analysis and structural health monitoring of heritage buildings," Proceedings, Annual Conference - Canadian Society for Civil Engineering, vol. 2019, 2019.
T. Michael and S. Kay , "IFC Monitor – An IFC schema extension for modeling structural health monitoring systems," Advanced Engineering Informatics, vol. 37, pp. 54 - 65, 2018.
D. D. Juan M, B. Liam J, G. Niamh , B. Ioannis, E. E. Mohammed Z and M. Campbell , "Management of structural monitoring data of bridges using BIM," Proceedings of the Institution of Civil Engineers: Bridge Engineering, vol. 170, no. 3, pp. 204 - 218, 2017.
F. Rodrigues, F. Antunes and R. Matos, "Safety plugins for risks prevention through design resourcing BIM," Construction Innovation, vol. 21, no. 2, pp. 244 - 258, 2019.
G. Mustapha , R. Hoemsen , R. Spewak and K. Knight , "Application and visualization techniques for advanced sensor networks case study: Sensor installation in skilled trades and technology centre," SHMII 2017 - 8th International Conference on Structural Health Monitoring of Intelligent Infrastructure, Proceedings, pp. 228 - 237, 2017.
H. Hong, C. Lan and L. Wang , "Design of Dynamic Building Information System Based on Structural Health Monitoring Information System Based on Structural Health Monitoring Information," vol. 11382, 2020.
A. Barontini, M. G. Masciotta, L. . F. Ramos, P. A. Mendes and P. B. Lourenço, "An overview on nature-inspired optimization algorithms for Structural Health Monitoring of historical buildings," Procedia Engineering, vol. 199, pp. 3320-3325, 2017.
C. Wang, J. Xiao, C. Zhang and X. Xiao, "Structural health monitoring and performance analysis of a 12-story recycled aggregate concrete structure," Engineering Structures, vol. 205, 2019.
E. E. Orenday Tapia, E. Tapia Tovar and J. Pacheco Martínez, "Non-Destructive Interventions for the Diagnosis of the Structural Condition of Two Temples in Aguascalientes, Mexico," Intervención (México DF), vol. 10, no. 19, 2019.
M. Madhoushi, S. Ebrahimi and A. Omidvar, "Structural health assessment of a historical building by using in situ stress wave NDT: a case study in Iran," CERNE, vol. 27, 2021.
A. Astorga, P. Guéguen and T. Kashima, "Nonlinear elasticity in buildings: a prospective way to monitor structural health," Procedia Engineering, vol. 199, pp. 2008-2013, 2017.
J. J. Olivera López and C. . A. Oyarzo Vera, "Structural diagnosis of a RC building based on its bio-seismic profile and an incremental dynamic analysis," Obras y proyectos, no. 27, 2020.
E. M. Tronci, M. De Angelis, R. Betti and V. Altomare, "Vibration-based structural health monitoring of a RC-masonry tower equipped with non-conventional TMD," Engineering Structures, vol. 224, 2020.
N. Trung , Luu, H. Al‐Hakam , M. Polter , J. Scherer R and T. Mansperger , "A variation model method for real time system identification in bridge health monitoring," IABSE Conference, Copenhagen 2018: Engineering the Past, to Meet the Needs of the Future - Report, pp. 360 - 366, 2018.
D. Langni, L. Shijin , M. Jinchao , L. Lizhen , Z. Mengjun , L. Ling and Z. Zheng , "Visualization and monitoring information management of bridge structure health and safety early warning based on BIM," Journal of Asian Architecture and Building Engineering, pp. 1-12, 2021.
A. Aseem, W. Latif Baloch, R. Arsalan Khushnood and A. Mushtaq, "Structural health assessment of fire damaged building using non-destructive testing and micro-graphical forensic analysis: A case study," Case Studies in Construction Materials, vol. 11, 2019.
M. O’Shea and J. Murphy, "Design of a BIM integrated structural health monitoring system for a historic offshore lighthouse," Buildings, vol. 10, no. 7, 2020.
R. Herrmann , F. Hille , S. Said , J. Sterthaus , K. Müller , T. Quercetti , F. Wille , J. A. Paffenholz and M. Baeßler , "Implementing a structural health monitoring system using digital models of the bam large drop test facility in horstwalde," Proceedings of the International Conference on Structural Dynamic , EURODYN, vol. 1, pp. 1293 - 1304, 2020.
M. Nayyerloo, J. Geoffrey Chase and C. Z. Mohammad Rabiepour, "Real-time structural health monitoring of nonlinear hysteretic structures using a fast and slow dynamics separation method," IFAC Journal of Systems and Control, vol. 15, 2020.
H. Robert , N. Hubert , A. Katharina Klemt and M. Steffen , "Konzept zur BIM-basierten instandhaltung von ingenieurbauwerken mit monitoringsystemen," Bautechnik, vol. 97, no. 12, pp. 826 - 835, 2020.
H. Seon Park and B. Kwan Oh, "Real-time structural health monitoring of a supertall building under construction based on visual modal identification strategy," Automation in Construction, vol. 85, pp. 273-289, 2017.
Jia He, Y. LinXu, Sheng Zhan and Qin Huang, "Structural control and health monitoring of building structures with unknown ground excitations: Experimental investigation," Journal of Sound and Vibration, vol. 390, pp. 23-38, 2017.
B. Đ. Bulajić, M. I. Todorovska, M. I. Manić and M. D. Trifunac, "Structural health monitoring study of the ZOIL building using earthquake records," Soil Dynamics and Earthquake Engineering, vol. 133, 2020.
Kai Yan, Yao Zhang, Yan Yan, Cheng Xu and Shuai Zhang, "Fault diagnosis method of sensors in building structural health monitoring system based on communication load optimization," Computer Communications, vol. 159, pp. 310-316, 2020.
F. J. Pallarés, Michele Betti, B. Gianni and P. Luis , "Structural health monitoring (SHM) and Nondestructive testing (NDT) of slender masonry structures: A practical review," Construction and Building Materials, vol. 297, 2021.
B. Kwan Oh, K. J. Kim, Y. Kim, H. S. Park and H. Adeli, "Evolutionary learning based sustainable strain sensing model for structural health monitoring of high-rise buildings," Applied Soft Computing, vol. 58, pp. 576-585, 2017.
L. Ierimonti, N. Cavalagli, I. Venanzi, E. García Macías and F. Ubertini, "A transfer Bayesian learning methodology for structural health monitoring of monumental structures," Engineering Structures, vol. 247, 2021.
L. H. B, Z. Q and Z. B. H, "Structural health monitoring of a newly built high-piled wharf in a harbor with fiber Bragg grating sensor technology: Design and deployment," Smart Structures and Systems, vol. 20, no. 2, pp. 163-173, 2017.
A. M. Davis, M. M. Mirsayar and D. J. Hartl, "A novel structural health monitoring approach in concrete structures using embedded magnetic shape memory alloy components," Construction and Building Materials, vol. 311, 2021.
E. J. Baas, M. Riggio and A. . R. Barbosab, "A methodological approach for structural health monitoring of mass-timber buildings under construction," Construction and Building Materials, vol. 268, 2021.
L. Li, J. Yuan, M. Tang, Z. Xu, W. Xu and Y. Cheng, "Developing a BIM-enabled building lifecycle management system for owners: Architecture and case scenario," Automation in Construction, vol. 129, 2021.
J. P. Carvalho, L. Bragança and R. Mateus, "Sustainable building design: Analysing the feasibility of BIM platforms to support practical building sustainability assessment," Computers in Industry, vol. 127, 2021.
A. Martínez Rocamora, C. Rivera Gómez, C. Galán Marín and M. Marrero, "Environmental benchmarking of building typologies through BIM-based combinatorial case studies," Automation in Construction, vol. 132, 2021.
B. Silvana , D. F. Mariella and F. Fabio , "Historic building information modelling: performance assessment for diagnosis-aided information modelling and management," Automation in Construction, vol. 86, pp. 256-276, 2018.
R. De Amicis , M. Riggio , A. Shahbaz Badr , J. Fick , A. Sanchez C and A. Prather E, "Cross-reality environments in smart buildings to advance STEM cyberlearning," International Journal on Interactive Design and Manufacturing, vol. 13, no. 1, pp. 331 - 348, 2019.
G. v. d. Heyde Fernandes, C. Torres Formoso and P. Tzortzopoulos Fazenda, "Method for automated verification of requirements in Social Housing developments," Ambiente Construído, vol. 18, no. 4, pp. 259-278, 2018.
M. A. María D, L. A. Mónica and M. R. María , "Building information modeling and safety management: A systematic review," Safety Science, vol. 101, pp. 11 - 18, 2018.
Y. Zhao, X. Deng and H. Lai, "Reconstructing BIM from 2D structural drawings for existing buildings," Automation in Construction, vol. 128, 2021.
N. Caterino, I. Nuzzo, A. Ianniello, G. Varchetta and E. Cosenza, "A BIM-based decision-making framework for optimal seismic retrofit of existing buildings," Engineering Structures, vol. 242, 2021.
M. Loyola and F. López, "An evaluation of the macro-scale adoption of Building Information Modeling in Chile: 2013-2016," Revista de la construcción, vol. 17, no. 1, 2018.
C. Thomas and L. Fernanda, "Automated digital modeling of existing buildings: A review of visual object recognition methods," Automation in Construction, vol. 113, 2020.
D. Utkucu and H. Sözer, "Interoperability and data exchange within BIM platform to evaluate building energy performance and indoor comfort," Automation in Construction, vol. 116, 2020.
S. C. Rafael F, F. Telmo R, C. Iñigo and R. Hugo , "A framework for the inclusion of RF transparency parameters into BIM databases," 2019 SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference, IMOC 2019, vol. 2019, 2019.
F. Rodrigues , J. Estrada , F. Antunes and P. Swuste , "Safety through design: A BIM-based framework," Sustainable Civil Infrastructures, pp. 112 - 123, 2018.
Z. Liu , C. Yuan , Y. Wang , A. Zhang and G. Shi , "Basado en BIM inteligente vigilancia método por súper alto edificio con múltiples fuentes información," vol. 47, no. 4, pp. 357 - 364, 2021.
Y. Shi , P. Han , J. Liu and Y. Zhang , "Design and application of structural health monitoring system based on BIM technology," Progress in Steel Building Structures, vol. 21, no. 2, pp. 107 - 114, 2019.
F. de Almeida Oliveira, L. M. Furtado Maués, C. C. Neves Rosa, D. de Gois Santos and R. de Melo Seixas, "Predicting waste generation in construction using BIM modeling," Ambiente Construído, vol. 20, no. 4, pp. 157-176, 2020.
M. Valinejadshoubi , A. Bagchi, O. Moselhi and A. Shakibabarough , "Investigation on the potential of building information modeling in structural health monitoring of buildings," CSCE General Conference 2018, Held as Part of the Canadian Society for Civil Engineering Annual Conference 2018, pp. 407 - 416, 2018.
R. Hartung , L. Senger , J. Arpe and A. K. Klemt, "Evaluation of structural health monitoring systems in bridge engineering for increase of safety in operations," 30th European Safety and Reliability Conference, ESREL 2020 and 15th Probabilistic Safety Assessment and Management Conference, PSAM 2020, pp. 4687 - 4694, 2020.
V. Mojtaba , B. Ashutosh and M. Osama , "Development of a BIM-based data management system for structural health monitoring with application to modular buildings: Case study," Journal of Computing in Civil Engineering, vol. 33, no. 3, 2019.
H. K. Tae , H. P. Sang , P. Sang I and H. L. Sang, "Building information modeling based bridge health monitoring for anomaly detection under complex loading conditions using artifcial neural networks," Journal of Civil Structural Health Monitoring, vol. 11, no. 5, pp. 1301-1319, 2021.
I. Stalin P, F. Theresa and S. Kay , "A semantic model for wireless sensor networks in cognitive buildings," Computing in Civil Engineering 2019: Smart Cities, Sustainability, and Resilience - Selected Papers from the ASCE International Conference on Computing in Civil Engineering 2019, pp. 234 - 241, 2019.
Q. Lu, L. Chen, S. Lee and X. Zhao, "Activity theory-based analysis of BIM implementation in building O&M and first response," Automation in Construction, vol. 85, pp. 317-332, 2017.
R. Jin, B. Zhong, L. Ma, A. Hashemi and L. Ding, "Integrating BIM with building performance analysis in project life-cycle," Automation in Construction, vol. 106, 2019.
S. Junior J, P. Baldauf J, T. Formoso C and Tzortzopoulos P, "Using bim and lean for modelling requirements in the design of healthcare projects," IGLC 2018 - Proceedings of the 26th Annual Conference of the International Group for Lean Construction: Evolving Lean Construction Towards Mature Production Management Across Cultures and Frontiers, vol. 1, pp. 571 - 581, 2018.
C. Jobim, M. Stumpf, R. Edelweis and A. Kern, "Analysis of the implementation of BIM technology in project and construction offices in a Brazilian city in 2015.," Revista ingeniería de construcción, vol. 32, no. 3, pp. 185-194, 2017.
J. P. Carvalho, L. Bragança and R. Mateus, "Optimising building sustainability assessment using BIM," Automation in Construction, vol. 102, pp. 170-182, 2019.
F. Araya, "State of the art of the use of BIM for the resolution of demands in construction projects.," Revista ingeniería de construcción, vol. 34, no. 3, 2019.
C. Boddupalli , A. Sadhu and E. Rezazadeh Azar , "An integrated structural health monitoring tool using building information modeling," 6th International Structural Specialty Conference 2018, Held as Part of the Canadian Society for Civil Engineering Annual Conference 2018, pp. 87 - 95, 2018.
M. Q. Huang, J. Ninić and Q. B. Zhang, "BIM, machine learning and computer vision techniques in underground construction: Current status and future perspectives," Tunnelling and Underground Space Technology, vol. 108, 2020.
G. Vito , C. Pietro and B. Alessandro , "Planning, management and administration of HS contents with BIM and VR in construction: an implementation protocol," Engineering, Construction and Architectural Management, vol. 28, no. 2, pp. 603 - 623, 2021.
C. Cavalliere, G. R. Dell'Osso, F. Favia and M. Lovicario, "BIM-based assessment metrics for the functional flexibility of building designs," Automation in Construction, vol. 107, 2019.
B. Chanakya , S. Ayan , R. A. Ehsan and P. Scott , "Improved visualization of infrastructure monitoring data using building information modeling," Structure and Infrastructure Engineering, vol. 15, no. 9, pp. 1247 - 1263, 2019.
R. Hartung , L. Senger and A. K. Klemt, "Linking building information modeling and structural health monitoring for reliable railway infrastructure," Proceedings of the 29th European Safety and Reliability Conference, ESREL 2019, pp. 596 - 603, 2020.
F. H. Abanda, J. H. M.Tah and F. K. T.Cheung, "BIM in off-site manufacturing for buildings," Journal of Building Engineering, vol. 14, pp. 89-102, 2017.
- Dr. Sócrates Muñoz, Sr. Mario Millones, Sr. Cristian Villanueva, La Ceniza de Bagazo de Caña de Azúcar Como Aditivo Estabilizador en Suelos Arcillosos con Fines de Pavimen-tación: Una Revisión Literaria , INGENIERÍA Y COMPETITIVIDAD: Vol. 25 Núm. 1 (2023): Ingeniería y Competitividad.
- Dr. Sócrates Muñoz, Sr. Jorge Mendoza, Srta. Mitzi Quispe, Una revisión sobre el rol de la inteligencia artificial en la industria de la construcción , INGENIERÍA Y COMPETITIVIDAD: Vol. 24 Núm. 02 (2022): Ingeniería y Competitividad
- Dr. Sócrates Muñoz, Sr. Jorge Nunton, Sr. Jean Portocarrero, Una revisión del comportamiento mecánico del concreto con adición de fibras de acero de neumáticos reciclados , INGENIERÍA Y COMPETITIVIDAD: Vol. 24 Núm. 02 (2022): Ingeniería y Competitividad
Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial-CompartirIgual 4.0.
Los autores que publican en esta revista están de acuerdo con los siguientes términos:
- Los autores conservan los derechos de autor y garantizan a la revista el derecho de ser la primera publicación del trabajo al igual que licenciado bajo una Creative Commons Attribution License que permite a otros compartir el trabajo con un reconocimiento de la autoría del trabajo y la publicación inicial en esta revista. A partir del volumen 22 número 1 (2020), la revista adopta la licencia CC BY-NC-SA 4.0.
- Los autores pueden establecer por separado acuerdos adicionales para la distribución no exclusiva de la versión de la obra publicada en la revista (por ejemplo, situarlo en un repositorio institucional o publicarlo en un libro), con un reconocimiento de su publicación inicial en esta revista.
- Se permite y se anima a los autores a difundir sus trabajos electrónicamente (por ejemplo, en repositorios institucionales o en su propio sitio web) antes y durante el proceso de envío, ya que puede dar lugar a intercambios productivos, así como a una citación más temprana y mayor de los trabajos publicados.