Energy consumption during surface texturing of AISI 1080 and AISI 52100 steels using CNC machining
Article Sidebar
Main Article Content
Surface texturing has been used in diverse applications to improve the tribological performance of mechanical components in contact. In particular, the imposition of a deterministic texture on metal surfaces through machining processes has energy costs associated with the consumption of electrical power, the wear of cutting tools and the inherent losses due to the transformation of electrical energy into mechanical energy, among others. Quantifying the energy consumption in texturing processes helps to evaluate the viability of increasing the areas to be textured, i.e., the total volume of material to be removed from the pieces. In this work, the surface texturing process of AISI 1080 and AISI 52100 steels with five geometric patterns was studied, with emphasis on the analysis of energy consumption in the machining center. Electrical energy consumptions between 31.8 and 52.3 Wh per mm2 of textured area were recorded and correlations between energy consumption, material, geometric design of the texture and textured area were established from the experimental data. An increase of 14% in energy consumption was found by rising the textured area for AISI 1080 steel, as opposed to AISI 52100 steel, which showed a reduction of energy consumption of 20.8 % when the textured area increased.
- computerized numerical control
- energy consumption
- machining
- surface texturing
Efraín Zuluaga, Universidad Nacional de Colombia, Facultad de Minas, Departamento de Materiales y Minerales, Grupo de Tribología y Superficies, Medellín, Colombia
https://orcid.org/0000-0001-9769-1175
Paula A. Cuervo, Universidad Nacional de Colombia, Facultad de Minas, Departamento de Materiales y Minerales, Grupo de Tribología y Superficies, Medellín, Colombia
https://orcid.org/0000-0003-3647-2096
Miyer Valdes, Universidad Nacional de Colombia, Facultad de Minas, Departamento de Materiales y Minerales, Grupo de Tribología y Superficies, Medellín, Colombia, Instituto Tecnológico Metropolitano, Medellín Colombia.
https://orcid.org/0000-0002-3407-4636
Juan Ardila, Universidad Surcolombiana, Ingeniería Agrícola, Área de Maquinaria Agrícola, Grupo de investigación Constru-USCO, Neiva, Colombia
https://orcid.org/0000-0002-3755-2189
Alejandro Toro, Universidad Nacional de Colombia, Facultad de Minas, Departamento de Materiales y Minerales, Grupo de Tribología y Superficies, Medellín, Colombia
https://orcid.org/0000-0002-5589-5820
(1) Jost H, Schofield, J. Energy Saving through Tribology: A Techno-Economic Study. Proceedings of the Institution of Mechanical Engineers. 1981 jun; 195(1): 151–173. https://doi.org/10.1243/PIME_PROC_1981_195 _016_02 DOI: https://doi.org/10.1243/PIME_PROC_1981_195_016_02
(2) Holmberg K, Erdemir A. Influence of tribology on global energy consumption, costs and emissions. Friction. 2017 sep; 5(3): 263– 284. https://doi.org/10.1007/s40544-017-0183-5 DOI: https://doi.org/10.1007/s40544-017-0183-5
(3) Lu P, Wood R. Tribological performance of surface texturing in mechanical applications-a review. Surface Topography: Metrology and Properties. 2020 sep; 8(4): 43001. https://doi.org/10.1088/2051- 672x/abb6d0 DOI: https://doi.org/10.1088/2051-672X/abb6d0
(4) Archard J. Elastic deformation and the laws of friction. Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences. 1957 dic; 243(1233): 190– 205. https://doi.org/10.1098/rspa.1957.0214 DOI: https://doi.org/10.1098/rspa.1957.0214
(5) Cuervo P. Análisis experimental del efecto del proceso de reperfilado sobre el desgaste y fatiga por contacto de rodadura de riel en el sistema rueda-riel en el Metro de Medellín [Tesis de maestría]. Medellín: Universidad Nacional de Colombia; 2014. Disponible en: https://repositorio.unal.edu.co/handle/unal/49843
(6) Stachowiak G, Batchelor A., Engineering tribology. 4a ed.: ButterworthHeinemann; 2014. https://doi.org/10.1016/B978- 0-12-397047-3.00020-5
(7) Albagachiev A, Gurskii B, Luzhnov Y, Romanova A, Chichinadze A. Economic and ecological issues in tribology. Russian Engineering Research. 2008 oct; 28(10): 959– 964. https://doi.org/10.3103/S1068798X08100092 DOI: https://doi.org/10.3103/S1068798X08100092
(8) Abdel-Aal H, Mansori M. Tribological analysis of the ventral scale structure in a Python regius in relation to laser textured surfaces. Surface Topography: Metrology and Properties. 2013 sep; 1(1): 015001. https://doi.org/10.1088/2051-672x/1/1/015001 DOI: https://doi.org/10.1088/2051-672X/1/1/015001
(9) Abdel-Aal H. Functional surfaces for tribological applications: inspiration and design. Surface Topography: Metrology and Properties. 2016 nov; 4(4): 043001. https://doi.org/10.1088/2051-672x/4/4/043001 DOI: https://doi.org/10.1088/2051-672X/4/4/043001
(10) Bruzzone A, Costa H, Lonardo P, Lucca D. Advances in engineered surfaces for functional performance. CIRP Annals - Manufacturing Technology. 2008 oct; 57 (2): 750–769. https://doi.org/10.1016/j.cirp.2008.09.003 DOI: https://doi.org/10.1016/j.cirp.2008.09.003
(11) Uddin Y, Liu M. Design and optimization of a new geometric texture shape for the enhancement of hydrodynamic lubrication performance of parallel slider surfaces. Biosurface and Biotribology. 2016 may; 2(2): 59–69. https://doi.org/10.1016/j.bsbt.2016.05.002 DOI: https://doi.org/10.1016/j.bsbt.2016.05.002
(12) Tala-ighil N, Fillon M. Tribology International A numerical investigation of both thermal and texturing surface effects on the journal bearings static characteristics. Tribology International. 2015 oct; 90: 228–239. https://doi.org/10.1016/j.triboint.2015.02.032 DOI: https://doi.org/10.1016/j.triboint.2015.02.032
(13) Ranjan P, Hiremath S. Role of textured tool in improving machining performance: A review. Journal of Manufacturing Processes. 2019 jul; 43(part a): 47–73. https://doi.org/10.1016/j.jmapro.2019.04.011 DOI: https://doi.org/10.1016/j.jmapro.2019.04.011
(14) Benardos P, Vosniakos G. Predicting surface roughness in machining: A review. International Journal of Machine Tools and Manufacture. 2003 jun; 43(8): 833–844. https://doi.org/10.1016/S0890-6955(03)00059-2 DOI: https://doi.org/10.1016/S0890-6955(03)00059-2
(15) Zhang X, Xie J, Xie H, Li L. Experimental investigation on various tool path strategies influencing surface quality and form accuracy of CNC milled complex freeform surface. International Journal of Advanced Manufacturing Technology. 2012 mar; 59 (5–8): 647–654. https://doi.org/10.1007/s00170-011- 3515-z DOI: https://doi.org/10.1007/s00170-011-3515-z
(16) Aizawa T, Tamaki M, Fukuda T. Large area micro-texture imprinting onto metallic sheet via CNC stamping. Procedia Engineering. 2014 oct; 81: 1427–1432. https://doi.org/10.1016/j.proeng.2014.10.168 DOI: https://doi.org/10.1016/j.proeng.2014.10.168
(17) Cho M, Park S. Micro CNC surface texturing on polyoxymethylene (POM) and its tribological performance in lubricated sliding. Tribology International. 2011 jul; 44 (7–8): 859– 867. https://doi.org/10.1016/j.triboint.2011.03.001 DOI: https://doi.org/10.1016/j.triboint.2011.03.001
(18) Orazi L, Montanari F, Campana G, Tomesani L, Cuccolini G. CNC paths optimization in laser texturing of free form surfaces. Procedia CIRP. 2015 jul; 33: 440–445. https://doi.org/10.1016/j.procir.2015.06.100 DOI: https://doi.org/10.1016/j.procir.2015.06.100
(19) Kawasegi N, Sugimori H, Morimoto H, Morita N, Hori I. Development of cutting tools with microscale and nanoscale textures to improve frictional behavior. Precision Engineering. 2009 jul; 33 (3): 248–254. https://doi.org/10.1016/j.precisioneng.2008.07.0 05 DOI: https://doi.org/10.1016/j.precisioneng.2008.07.005
(20) Sugihara T, Enomoto T. Crater and flank wear resistance of cutting tools having micro textured surfaces. Precision Engineering. 2013 oct; 37 (4): 888–896. https://doi.org/10.1016/j.precisioneng.2013.05.0 07 DOI: https://doi.org/10.1016/j.precisioneng.2013.05.007
(21) Sun J, Zhou Y, Deng J, Zhao J. Effect of hybrid texture combining micro-pits and microgrooves on cutting performance of WC/Co-based tools. International Journal of Advanced Manufacturing Technology. 2016 feb; 86 (9–12): 3383–3394. https://doi.org/10.1007/s00170-016- 8452-4 DOI: https://doi.org/10.1007/s00170-016-8452-4
(22) Orra K, Choudhury S. Tribological aspects of various geometrically shaped microtextures on cutting insert to improve tool life in hard turning process. Journal of Manufacturing Processes. 2018 ene; 31: (502–513). https://doi.org/10.1016/j.jmapro.2017.12.005 DOI: https://doi.org/10.1016/j.jmapro.2017.12.005
(23) Zuluaga E. Desarrollo de superficies determinísticas inspiradas en piel de serpiente mediante técnicas de texturizado mecánico para aplicaciones tribológicas [Tesis de maestría]. Medellín: Universidad Nacional de Colombia; 2020. Disponible en: https://repositorio.unal.edu.co/handle/unal/79322
(24) Cuervo P, López D, Cano J, Sánchez J, Rudas S, Estupiñán H, Toro A, Abdel-Aal H. Development of low friction snake-inspired deterministic textured surfaces. Surface Topography: Metrology and Properties. 2016 may; 4 (2): 024013. https://doi.org/10.1088/2051-672X/4/2/024013 DOI: https://doi.org/10.1088/2051-672X/4/2/024013
(25) Ballesteros LM, Zuluaga E, Cuervo P, Rudas JS, Toro A. Tribological behavior of polymeric 3D-printed surfaces with deterministic patterns inspired in snake skin morphology. Surf Topogr Metrol Prop. 2021;9(1):014002. https://doi.org/10.1088/2051-672X/abe211 DOI: https://doi.org/10.1088/2051-672X/abe211
(26) Toro A, Abdel-Aal HA, Cuervo P, Ballesteros LM, Rudas S, Isaza C, et al. Influence of surface morphology and internal structure on the mechanical properties and tribological response of Boa Red Tail and Python Regius snake skin. J Mech Behav BiomedMater. 2021;119:104497. https://doi.org/10.1016/j.jmbbm.2021.104497 DOI: https://doi.org/10.1016/j.jmbbm.2021.104497
(27) YG-1. yg-1.kr [Internet]. Catalog YG-1. 2018 [citado 2021 may]. Disponible en: https://www.yg1.kr/por/support/catalog.asp
(28) Pavanaskar S, Pande S, Kwon Y, Hu Z, Sheffer A, McMains S. Energy-efficient vector field based toolpaths for CNC pocketmachining. Journal of Manufacturing Processes. 2015 oct; 20(part 1): 314–320. https://doi.org/10.1016/j.jmapro.2015.06.009 DOI: https://doi.org/10.1016/j.jmapro.2015.06.009
(29) Casillas AL. Máquinas cálculos de taller. 40a ed.: Máquinas España; 1943. Disponible en: https://www.casillas-maquinas.com/
Downloads
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors grant the journal and Universidad del Valle the economic rights over accepted manuscripts, but may make any reuse they deem appropriate for professional, educational, academic or scientific reasons, in accordance with the terms of the license granted by the journal to all its articles.
Articles will be published under the Creative Commons 4.0 BY-NC-SA licence (Attribution-NonCommercial-ShareAlike).