Inferential statistics models to relate the rejections of an engine cold testing and the machining defects in camshaft assembly bores
Article Sidebar
Main Article Content
In the manufacturing industry, it is important to reduce machining deviations as soon as possible to avoid the cost
associated with reworks. The definition of mathematical models that predict future failures in the diagnosis of
combustion engines associated with errors in machining is a way that helps to save time and money in a process. This
paper proposes the analysis and establishment of correlations between the deviations of the machining in cylinder heads and the rejections of an engine cold testing in an automotive manufacturing company. To determine the relationships, a sample of heads and engines was measured in two months, and statistical models were established using inferential statistics. It was possible to establish 77 statistical models that allow predicting which machining of the cylinder heads are contributing to the rejects and therefore adjust the corresponding tools. Due to a large amount of data from the results of the 77 models, this article shows only one model which is one of the most representatives.
Using this statistical model, it was possible to know which characteristic of the tool should be adjusted in addition it
was also possible to know that the test limits for oil pressure have to be adjusted in the engine cold testing.
- Engine cold testing
- Head cylinder machining
- Inferential statistics
- Variables correlation
- Quality control
Dr. Mario Hernandez Nuñez, Advanced Technology Center CIATEQ, Toluca, México.
https://orcid.org/0000-0001-8178-3366
Moica S, Radulescu E. Statistical controls have a significant influence on Non Quality Cost. Cases study in a company those manufacturing aluminum casting components. Procedia Technology. 2014; 12. DOI: https://doi.org/10.1016/j.protcy.2013.12.519
Wang P, Zhang D, Li S, Chen B. Machining error Control by integrating Multivariate Statistical. Chinese journal of aeronautics. 2012 December; 25(6). DOI: https://doi.org/10.1016/S1000-9361(11)60465-2
Qin SJ, Dong. On data science for process systems modeling, control and operations. IFAC-PapersOnLine. 2020; 53(2). DOI: https://doi.org/10.1016/j.ifacol.2020.12.540
Melhem M, Ouladsine M, Pinaton J, Ananou B. Regression methods for predicting the product´s quality in the semiconductor manufacturing process. IFAC-PapersOnLine. 2016 January; 49(12). DOI: https://doi.org/10.1016/j.ifacol.2016.07.554
Jia L, Chen C, Xu S, Shen J. Fabric defect inspection based on lattice segmentation and template statistics. Information Sciences. 2019 October; 512(2). DOI: https://doi.org/10.1016/j.ins.2019.10.032
Qi Q, Li T, Scott P, Jiang X. A correlational study of areal surface texture parameters on some typical machined surfaces. Procedia CIRP. 2015 December; 27. DOI: https://doi.org/10.1016/j.procir.2015.04.058
Mahmoud Ali M, Mohamed Omran AN, Abd-El-Hakeem Mohamed. Prediction the correlations between hardness and tensile properties of aluminium silicon alloys produced by various modifiers and grain refineries using regression analysis and an artificial neural network model. Engineering Science and Technology, an International Journal. 2021 February; 24(1). DOI: https://doi.org/10.1016/j.jestch.2020.12.010
Mikó B. Assessment of flatness error by regression analysis. Measurement. 2020 February; 171. DOI: https://doi.org/10.1016/j.measurement.2020.108720
Heidarian F, Palkowski H. Predicting the eccentricity of tubes by developing a multiple regression model in tube drawing process with tilted die. Procedia manufacturing. 2020 January; 50. DOI: https://doi.org/10.1016/j.promfg.2020.08.013
Fogaça , Luiz de Souza D, Manéa F. Comparison between cold and hot test procedures in a company manufacturer of diesel engines. 2018; 25(2): p. 343-353. DOI: https://doi.org/10.1590/0104-530x3094-16
Alvey A, Cerrato G. Application of NVH techniques to engine production line test. Manufacture. 2005 Mayo;: p. 16-19. DOI: https://doi.org/10.4271/2005-01-2452
RAJAGOPAL J. An Introduction to Cold Testing. USA:; 2001.
Martyr AJ, Plint MA. Engine testing: The desing, building, modification and use powertrain test facilities. 4th ed. London: Butterworth-Heinemann; 2012.
Arasaratnam I, Habibi S, Kelly C, Fountaine TJ, Tjong J. Engine fault detection using vibration signal reconstruction in the crank-angle domain. SAE International. 2011 May;(2011-01-1660). DOI: https://doi.org/10.4271/2011-01-1660
Maul A, Mari L, Torres Irribarra D, Wilson M. The quality of measurement results in terms of the structural features of themeasurement process. Measurement. 2018 February; 116. DOI: https://doi.org/10.1016/j.measurement.2017.08.046
Diamoutene A, Noureddine F, Kamsu-Foguem B, Barro. Quality control in machining using order statistics. Measurement. 2017 November; 116. DOI: https://doi.org/10.1016/j.measurement.2017.11.036
(17). Stief A, Baranowski J. Fault diagnosis using interpolated Kernel density estimate. Measurement. 2021 Mayo; 176(109230).
https://doi.org/10.1016/j.measurement.2021.109230 DOI: https://doi.org/10.1016/j.measurement.2021.109230
Downloads
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors grant the journal and Universidad del Valle the economic rights over accepted manuscripts, but may make any reuse they deem appropriate for professional, educational, academic or scientific reasons, in accordance with the terms of the license granted by the journal to all its articles.
Articles will be published under the Creative Commons 4.0 BY-NC-SA licence (Attribution-NonCommercial-ShareAlike).